磁控溅射ZnO薄膜生长的等离子体发射光谱研究

通过反应磁控溅射过程中的等离子体发射光谱，研究了制备ZnO薄膜的沉积温度、氧气流量比例R=O₂/(O₂+Ar)对Zn和O原子发射光谱的影响，并结合ZnO薄膜的结构和物理性能，探讨了沉积温度在ZnO薄膜生长中的作用.研究结果显示：当R≥0.75%时， Zn的溅射产额随R的增加基本呈线性下降规律.当R介于10%—50%时，氧含量的变化相对平缓，有利于ZnO薄膜生长的稳定性控制.Zn原子发射光谱强度随沉积温度的变化可以分为三个阶段.当沉积温度低于250℃时，发射光谱强 关键词： ZnO 薄膜生长 反应磁控溅射 等离子体发射光谱     

研究性物理实验与大学生创新心理品质培养

文章提出了大学研究性物理实验与创新心理品质培养的主题,介绍了大学研究性物理实验的特点,论述了大学研究性物理实验对大学生创新心理品质的影响。     

棱镜自重变形对波面影响的研究

采用有限元方法分析了单棱镜在重力作用下三个典型位置的表面变形，对棱镜表面Φ425mm通光孔径轴向变形量进行Zernike多项式拟合，画出了相应的波差图，并确定设计方案.进一步选择Φ360 mm口径光束对双棱镜在几种典型相对位置下进行光线采样、追迹，计算得到不同情况下由于双棱镜自重变形引起的总波差.     

二维变系数反应扩散方程的紧交替方向差分格式

1 引言 在研究热传导过程、气体扩散现象和电磁场的传播等问题时，常常遇到抛物型偏微分方程。用有限差分方法研究这类问题的数值解法目前已经有了许多工作。对于二维、三维抛物方程的数值求解比较理想的方法是交替方向法。     

锥形透镜光纤聚焦特性研究

锥形透镜光纤(TLF)是实现光纤与平面光波光路(PLC)芯片高效耦合的核心元件。了解和掌握其聚焦特性是指导平面光波光路尾纤封装技术的关键。给出了表征锥形透镜光纤聚焦特性的两个参量出射光斑直径和远场发散角的理论分析模型,其误差小于1.14%;采用光束传播法数值模拟了锥形透镜光纤中的光波传输和模斑的演化,确定了锥形透镜光纤端面出射光斑的大小;优化锥形透镜光纤结构参量为:拉锥长度300μm,锥角0.733°,透镜曲率半径13.485μm;建立了基于数字摄像机的锥形透镜光纤出射光场测试系统,提出了物理光学反向推演法,计算出锥形透镜光纤聚焦光斑尺寸和远场发散角。理论与实验结果有着良好的一致:对于相同结构参量的锥形透镜光纤,实验反推法得到的出射光斑尺寸与理论值相比误差为3.15%,远场发散角误差为3.67%。     

Structures and stability of Al<Subscript><Emphasis Type="Bold">7</Emphasis></Subscript>C and Al<Subscript><Emphasis Type="Bold">7</Emphasis></Subscript>N clusters

We report results of the atomic and electronic structures of Al₇C cluster using ab initio molecular dynamics with ultrasoft pseudopotentials and generalized gradient approximation. The lowest energy structure is found to be the one in which carbon atom occupies an interstitial position in Al₇ cluster. The electronic structure shows that the recent observation [Chem. Phys. Lett. 316, 31 (2000)] of magic behavior of Al₇C^- cluster is due to a large highest occupied and lowest unoccupied molecular orbital (HOMO-LUMO) gap which makes Al₇C^- chemically inert. These results have further led us to the finding of a new neutral magic cluster Al₇N which has the same number of valence electrons as in Al₇C^- and a large HOMO-LUMO gap of 1.99 eV. Further, calculations have been carried out on (Al₇N)₂ to study interaction between magic clusters. Received 28 July 2001     

Molecular dynamics simulation of processing using AFM pin tool

A three-dimensional molecular dynamics (MD) model is utilized to investigate the effect of tool geometry on the deformation process of the workpiece and the nature of deformation process at the atomic-scale. Results show that different states exist between the atomic force microscope (AFM) pin tool and the workpiece surface, i.e. the non-wear state, the ploughing state, the state in which ploughing is dominant and the state in which cutting plays a key role. A relationship between the deformation process of the workpiece and the potential energy variation is presented. The potential energy variation of atoms in different deformed regions in the workpiece such as plastically deformed region, elastically deformed region and the mixed deformation region is different. The features of variations of potential energy are discussed.     

Minimal Submanifolds in a Locally Symmetric and Conformally Flat Space

We study minimal submanifolds in the locally symmetric and conformally flat Riemannian manifold and generalize Yau's result obtained in J. Amer. Math. 97 (1975), 76–100.     

Entropy for frame bundle systems and Grassmann bundle systems induced by a diffeomorphism

A Liao hyperbolic diffeomorphism has equal measure entropy and topological entropy to that of its induced systems on frame bundles and Grassmann bundles. This solves a problem Liao posed in 1996 for Liao hyperbolic diffeomorphisms.     

锥形光纤中光波传输特性的蒙特卡罗模拟

为了分析锥形光纤中光子流的传输特性和空间分布特性，采用了蒙特卡罗算法对其进行了模拟仿真，得到了大量光子经过锥形光纤后的光子分布图.模拟实验结果表明，通过锥形光纤的大量光子集中在探测器中心，到达探测器某一位置的光子数随着该位置到探测器中心距离的增加而减少，并且在锥形光纤锥度比一定的条件下，改变锥形光纤长度，光强度随着长度的增加而下降，但通过锥形光纤的光子分布是一样的.这些研究结果对锥形光纤的设计和实际应用提供了重要依据.